Subcategories

• SOPPEC CONSTRUCTION

  Soppec Construction

  For more than 15 years, the Technima group has been manufacturing and marketing a wide range of marking products for construction and public works professionals under its strong brand name SOPPEC CONSTRUCTION. For the marking and signalling operations essential to their profession, SOPPEC CONSTRUCTION offers a wide range of fluorescent and non-fluorescent marking paints with standardized colors. In addition to marking paints for construction & public works, technical products and construction marking accessories complete this offer to facilitate the progress of structural work or finishing work: marking rods and marking guns, chalk lines and powders, cold mixes, marking tapes, bituminous sprays... Discover our range specially designed for the most demanding workers!

  The certified QSE management system

  SOPPEC's integrated QSE management system is based on three certifications: ISO 9001 for Quality, ISO 14001 for the environment and ISO 45001 for Health and Safety. In these three complementary areas, SOPPEC's approach is based on risk analysis and prevention, continuous performance improvement, compliance with regulatory requirements and customer satisfaction.
  Since 2004, the triple certification has been successfully renewed every three years.

  Storage and management of Soppec's Construction products

  Aerosols should be stored between 15 and 25°C and between 50 and 60% relative humidity.
  Storage time under the above conditions before use: solvent phase tracers: 4 years water phase tracers: 2 years
  Do not expose to temperatures above 50°C.
  Keep away from sources of ignition, heat and sunlight.
  As for any other handling and storage operation, it is particularly recommended NOT TO SMOKE.

  Packaging of Soppec's Construction products

  All our aerosols have a gross volume of 650 ml and a net volume of 500 ml.
  They are packaged on filmed pallets of 75 boxes of 12 aerosols.

• SOPPEC FOREST

  Soppec Forest

  Professionals in the wood industry rely on the products of the SOPPEC FOREST range to meet their marking needs during forest management, mobilization and/or wood processing operations. This range is adapted to the needs of precision, visibility and durability and is availbale in a wide variety of applications. The range of fluorescent and non-fluorescent tree marking paints and associated products is very diversified and meets the most demanding requirements of forestry users.
   
  The SOPPEC FOREST range also offers a set of complementary forestry products and accessories for tree marking operations, products especially dedicated to the wood sector.
   
  All our tree marking paints are fitted with a cap that ensures precision of marking, no drips of paint, and comfortable use. They are used head up.

  The certified QSE management system

  SOPPEC's integrated QSE management system is based on three certifications: ISO 9001 for Quality, ISO 14001 for the environment and ISO 45001 for Health and Safety. In these three complementary areas, SOPPEC's approach is based on risk analysis and prevention, continuous performance improvement, compliance with regulatory requirements and customer satisfaction.
  Since 2004, the triple certification has been successfully renewed every three years.

  Storage and management of Soppec Forest products

  Aerosols should be stored between 15 and 25°C and between 50 and 60% relative humidity. Storage time under the above conditions before use: solvent phase tracers: 4 years water phase tracers: 2 years
  Do not expose to temperatures above 50°C. Keep away from sources of ignition, heat and sunlight. As for any other handling and storage operation, it is particularly recommended NOT TO SMOKE.

  Packaging of Soppec Forest products

  All our aerosols have a gross volume of 650 ml and a net volume of 500 ml. They are packaged on filmed pallets of 75 boxes of 12 aerosols.

• SOPPEC LINE

  Soppec Line

  To structure space, delimit surfaces and optimize traffic, line marking is necessary everywhere: in factories and warehouses to improve safety and reduce transport risks in accordance with the provisions of the labor code, for sports fields or for marking private parking lots. In order to meet these needs, Technima's SOPPEC LINE range includes marking solutions that combine the use of line marking paints with floor marking accessories such as specially adapted line marking trolleys. Technima also offers a set of stencils for floor marking (letters, numbers, symbols, etc.), which are essential for applying clear and visible signs.
   
  In 2021 Technima launched the SOPPEC PureSPRAY ™ system : the very best of TECHNIMA ’s expertise within the area of aerosol marking paint. It is the very unique combination of a paint formulation with more pigments, the exclusive design of the combo « aerosol + spray nozzle + trolley » which secures a pure line, with no need of flanges or other tweaks to keep the line edge quality under control.
  the SOPPEC PureSPRAY ™ system also comes with a tape applicator and adhesive marking tapes.

  The certified QSE management system

  SOPPEC's integrated QSE management system is based on three certifications: ISO 9001 for Quality, ISO 14001 for the environment and ISO 45001 for Health and Safety. In these three complementary areas, SOPPEC's approach is based on risk analysis and prevention, continuous performance improvement, compliance with regulatory requirements and customer satisfaction.
  Since 2004, the triple certification has been successfully renewed every three years.

  Storage and management of our line marking paints

  Line marking paints should be stored between 15 and 25°C and between 50 and 60% relative humidity.
  Storage time under the above conditions before use: solvent based markers: 4 years water based markers: 2 years
  Do not expose to temperatures above 50°C.
  Keep away from sources of ignition, heat and sunlight.
  As for any other handling and storage operation, it is particularly recommended NOT TO SMOKE.

  Packaging of our line marking paints

  Our line marking paints with a gross volume of 650 ml and a net volume of 500 ml / Tracing 500 ml are packaged on shrink-wrapped pallets of 75 boxes of 12 aerosols.
  Our 1000 ml gross and 750 ml net aerosols are packaged on pallets of 6 aerosol cartons.

• SOPPEC EVENT

  Soppec Event

  For sports or urban events, outdoors or indoors, day or night, event marking paints and varnishes in aerosol are practical solutions for marking, delimiting locations, signaling hazardous areas or emergency situations. Technima's SOPPEC EVENT range offers products adapted to all these uses. You will find temporary marking paints (lasting 1 or 2 months) - ideal for markings that fade quickly over time - effect paints - photoluminescent paint, reflective paint and heat-sensitive paint, essential for making your markings visible in the dark - marking & signaling supplements - marking chalk, marking tape, protective varnish, stencils... - Indispensable for the event industry and floor marking accessories - for a clean and precise application of spray paint.

  Storage and handling of your event marking paints

  Event marking paints should be stored between 15 and 25°C and between 50 and 60% relative humidity.
  The duration of storage before use in the conditions described above is:
  
      • 2 years for effect paints.
      • 4 years for marking paints.

  
  Do not expose to temperatures above 50°C.
  Keep away from sources of ignition, heat and sunlight. As for any other handling and storage operation, it is particularly recommended NOT TO SMOKE.

  Packaging of your event marking paints

  All our event marking paints are a gross volume of 650 ml and a net volume of 500 ml. The "effect" products are packaged on filmed pallets of 75 boxes of 6 or 12 aerosols. Marking paints are packaged on pallets of 75 boxes of 12 aerosols.

• SOPPEC COLORS

  Soppec Colors

  In all industrial or agricultural activities, the need to quickly restore the supports and parts of equipment or utility vehicles (agricultural, public works, etc.), requires the use of industrial paints for protection, touch-up, finishing or coloring. SOPPEC COLORS offers a wide range of industrial paints to meet the diverse requirements of European professional users in the manufacturing industry, agricultural and construction machinery rental. In addition to a wide range of industrial spray paints with numerous RAL references and based on acrylic resins, SOPPEC COLORS offers a range of industrial coatings, galva paints and special paints intended for the preparation or finishing of substrates: primers, galvanizing paints, etc. To facilitate the application of your industrial touch-up paints, SOPPEC COLORS also offers marking spray paint accessories.

  General recommendations for the use of our industrial paints

  Most of our industrial paints in aerosol conditionning should be used on clean, dry surfaces and at room temperature (5°C to 30°C) for optimal performance. SOPPEC industrial paints are used vertically (head up).
  Shake well before use and regularly during use. Purge head down after use to clean the valve and the diffuser. It is important to store our industrial aerosol paints in a frost-free environment, ideally at a temperature of 15 to 25°C with a Relative Humidity of 50 to 60%. The average storage time for touch-up paints under the above conditions is approximately 1 year. Do not expose to temperatures above 50°C.
  Keep away from sources of ignition, heat and sunlight. Use preferably in a ventilated area. Do not use on electrical or electronic equipment. Do not use outdoors at temperatures below 10°C or in bright sunlight or rain.
  As with all other handling and storage operations, it is particularly recommended not to smoke.

  Packaging of our industrial paints

  • Touch-up paints are available in 400 and 500 ml.
  • Other industrial paints are only available in 500 ml.
  • and in boxes of 12 aerosols.
• SOPPEC PRO TECH

  Soppec Pro Tech

  In the manufacturing industry, but also in the maintenance of agricultural and construction equipment, the maintenance of parts, gears, machines and tools requires the use of technical, practical and efficient sprays to clean, protect and lubricate. The technical spray of the SOPPEC PRO TECH range are an efficient and fast solution for the application of greases, cleaners and lubricants. Technima offers a wide range of technical sprays, grouped according to their functions: PROTECTION, CLEANING, LUBRICATION. In addition, there is a range of special multipurpose products. Most of them can be used in all directions and are therefore suitable for the maintenance of horizontal or vertical surfaces or parts. SOPPEC PRO TECH technical products are available in several packaging sizes (expressed in net volume).

  In particular, you will find in the SOPPEC PRO TECH range of technical sprays:
  
      • Industrial cleaners : degreasers, cleaners, solvents...
      • Spray lubricants : spray greases, cutting oils, industrial lubricants, PTFE...
      • Very powerful penetrating sprays : organic degreasing agent, graphite oil, cold degreasing agent...
      • Spray products for surface protection : quick wax, petroleum jelly, waterproofing...
      • More specialized technical products : leak detectors, strippers, anti-graffiti spray...

  General recommendations for the use of our technical sprays

  Most of the technical sprays should be used on clean and dry surfaces and at room temperature (5°C to 30°C) for optimal performance. It is important to store them in a frost-free environment. The average storage time of the products in the above conditions is about 1 year. Do not expose to temperatures above 50°C. Keep away from sources of ignition, heat and sunlight. As for any other handling and storage operation, it is particularly recommended NOT TO SMOKE.