TRACK MARKER marking spray paint
Temporary fluorescent marking spray for short-term applications.
Reference : 141213
TRACK MARKER is a fluorescent marking spray designed for temporary markings lasting up to 3 months. Ideal for use on construction sites, landscaping, and public works where high durability is not required. Equipped with the patented “TP” safety cap for enhanced user safety and precision.
TRACK MARKER marking spray paint
PROPERTIES
• Suitable for a wide range of surfaces including concrete, asphalt, grass, gravel, sand, stone, and wood.
• Patented TP safety cap: shatterproof, prevents accidental release of gas and paint, protecting the user.
• Fluorescent formulation for high visibility even from a distance.
• Markings remain visible for up to 3 months depending on the surface, conditions of application, and UV exposure.
• Ideal for temporary marking tasks where long-term durability is not essential.
• Rapid drying time: approximately 5 minutes.
• Durable safety head withstands drops from heights up to 1.5 meters. • Operating temperature: -20°C to +50°C.
SPECIFICATIONS
• Binders: Acrylic.
• Pigments: Mineral and organic pigments free from lead and cadmium.
• Solvents: Complex blend free from chlorinated solvents and aromatic compounds (e.g., toluene, xylene).
• Propellant gas: Special blend of isobutane and propane.
• Volume: 500 ml aerosol can.
• Application area: Construction, landscaping, roadworks, and general short-term marking.
APPLICATION METHOD
• Apply manually or with our application accessories (marking stick or gun).
• Before use: Shake the can vigorously with the spray head pointing downward.
• After use: Vent the can in a vertical position.
141213
Data sheet
- Volume
- 500 ml
- Marking time
- 6 months
- Product type
- Fluorescent paint, Marking paint
- Application domain
- Roads, earthworks, pipes, construction..., Mapping, tracking, picketing, retouch, Signalling and events, landscape, gardeners marking, Signalling and event
- Application area
- Plastic, Metal, Woods, Minerals, Sands, Gravels, Grass, Bitumens, Concrete
- Packaging
- Box of 12 cans
Specific References
- EAN13
- 3598300014294
Instruction for use
- Before each use, shake the can well (even after hearing the beads clearly)
- To optimize the quality of the marking, we advise you to spray the paint at 10 - 15 cm from the surface / floor
- After use, place the aerosol in a "head up" position and purge for 2 seconds to clean the valve and the diffuser. This prevents the aerosol from clogging
- To facilitate your markings and limit bad postures and musculoskeletal disorders.
Hazard pictograms: 
Signal word: DANGER
Product identifier:
EC 919-857-5 — HYDROCARBONS, C9–C11, N-ALKANES, ISOALKANES, CYCLICS, < 2% AROMATICS
607-022-00-5 — ETHYL ACETATE
Hazard statements:
H222 – Extremely flammable aerosol.
H229 – Pressurized container: may burst if heated.
H319 – Causes serious eye irritation.
You might also like
TRACK MARKER is a fluorescent marking spray designed for temporary markings lasting up to 3 months. Ideal for use on construction sites, landscaping, and public works where high durability is not required. Equipped with the patented “TP” safety cap for enhanced user safety and precision.