S MARK : THE FLUORESCENT MARKING SPRAY PAINT
WITH BEST QUALITY/PRICE COMPROMISE

Properties of the S MARK fluorescent worksite marker

• Usable on a very wide range of surfaces such as: concrete, asphalt, grass, gravel, sand, stone, wood.
• A particularly robust safety cap (no breakage if a full aerosol is dropped from a height of 1.50m)
• Rapid drying: approximately 10 min
• Good autonomy and coverage ability: 1 aerosol is sufficient to durably mark an 55m line (2cm wide) using the Soppec marking stick
• Good marking duration including on damp surfaces, of up to 6 months (dependent on the surface, the conditions of application and UV exposure)
• Temperature range: -20°C to 50°C
• S MARK is available in a wide range of colours.
• Aerosol cans, gross volume 650 ml, net volume 500 ml, in boxes of 12.

Specifications of the S MARK spray marker

Composition

Binder: acrylic.
Pigments: mineral and organic, free from heavy metals.
Solvents: complex blend free from chlorinated solvents and aromatic compounds.
Propellant: specific blend of isobutane and propane.

Application method

Manually or using our purpose-designed application equipment (see bellow).
BEFORE USE: shake vigorously head down.
AFTER USE: purge head up.

Health and safety

Safety data sheets are available free of charge on the internet: www.quick-fds.com.
No paint mist or drips during use.
CLP labelling with a single pictogram.

DANGER
H222 Extremely flammable aerosol.
H229 Pressurised container: May burst if heated.
H319 Causes serious eye irritation.
H336 May cause drowsiness or dizziness.