S MARK marking spray paint
Reference : 141916
S MARK is a fluorescent marking spray (6 months duration) used for all general marking works in various fields: earthworks, pipework and construction, roads maintenance, buried networks. Easy and safe to use, S MARK is now fitted with the patented Soppec «TP» safety spray cap.
S MARK marking spray paint
S MARK : THE FLUORESCENT MARKING SPRAY PAINT
WITH BEST QUALITY/PRICE COMPROMISE
Properties of the S MARK fluorescent worksite marker
- Usable on a very wide range of surfaces such as: concrete, asphalt, grass, gravel, sand, stone, wood.
- A particularly robust safety cap (no breakage if a full aerosol is dropped from a height of 1.50m)
- Rapid drying: approximately 10 min
- Good autonomy and coverage ability: 1 aerosol is sufficient to durably mark an 55m line (2cm wide) using the Soppec marking stick
- Good marking duration including on damp surfaces, of up to 6 months (dependent on the surface, the conditions of application and UV exposure)
- Temperature range: -20°C to 50°C
- S MARK is available in a wide range of colours.
- Aerosol cans, gross volume 650 ml, net volume 500 ml, in boxes of 12.
Composition
Binder: acrylic.
Pigments: mineral and organic, free from heavy metals.
Solvents: complex blend free from chlorinated solvents and aromatic compounds.
Propellant: specific blend of isobutane and propane.
Data sheet
- Volume
- 500 ml
- Product type
- Marking paint
- Application domain
- Roads, earthworks, pipes, construction...
- Application area
- ...
- Packaging
- Box of 12 cans
Manually or using our purpose-designed application equipment (see bellow).
BEFORE USE: shake vigorously head down.
AFTER USE: purge head up.
Safety data sheets are available free of charge on the internet: www.quick-fds.com.
No paint mist or drips during use.
CLP labelling with a single pictogram.
DANGER
H222 Extremely flammable aerosol.
H229 Pressurised container: May burst if heated.
H319 Causes serious eye irritation.
H336 May cause drowsiness or dizziness.
You might also like