Adhesion primer
Reference : 470101
High quality universal primers, offering rapid drying and high coverage, ideal for surface preparation (metal, wood, plastic and many others) before paint-spraying. Can be used on bare steel and lightly rusted surfaces. Also suitable for plastic and wood.
Adhesion primer
Properties of the Adhesion primer
- Excellent adhesion (for both smooth and porous surfaces), covers well and is easy to sand.
- Corrosion-resistant
- Heat resistance: 110°C
- Dust dry after 10 to 15 minutes
- Touch dry after 15 to 25 minutes
- Leave to dry for 12 hours between coats
(Figures given for information only, actual data’s will depend on the temperature, paint thickness, humidity etc)
Composition
Binder: acrylic
Solvent: blend of solvents
Propellant: dimethyl ether
Data sheet
- Volume
- 500 ml
- Product type
- Adhesion primer
- Application domain
- Substrate preparation
- Application area
- ...
- Packaging
- Box of 12 cans
- Thoroughly shake the aerosol for at least 2 minutes before use to ensure the pigments are correctly mixed.
- The surface must be clean, dry and free of grease. Remove all residues of varnish, rust, etc, then sand. When using out-of-doors, remove any moss or algae present on the surface. Cover the surrounding areas.
- Spray at a distance of 25 cm from the surface. Best results are obtained by applying several thin coats in different directions rather than a single thick coat.
- Leave to dry for approximately 20 minutes between coats.
Safety data sheets are available free of charge on the internet: www.quick-fds.com.
CLP labelling with three pictograms.
DANGER
H222 Extremely flammable aerosol.
H229 Pressurised container: May burst if heated.
H319 Causes serious eye irritation.
H336 May cause drowsiness or dizziness.