Contact cleaner lubricant spray
Reference : 930122
A combined cleaner and lubricant oil that not only offers high quality protection but can also dissolve rust. It guarantees a long operational life for electrical appliances and less downtime. The contact cleaner lubricant spray is non-corrosive, eliminates dirt and improves conductivity. It reduces mechanical resistance and provides long-term protection against humidity.
Contact cleaner lubricant spray
Specifications of the Contact cleaner lubricant spray
- Packaging: 400 ml
- Composition: aliphatic hydrocarbons and mineral oil
- Appearance: colourless clear liquid
- Propellant: propane-butane
- VOC - CH%: 93%
- VOC-EU g/l: 645 g/l
- Relative density (20°C g/ml): 0.694
- Vapour pressure at 20°C: 1.8 - 2.4 bar
- Spray flow: 2.1 g/sec
930122
Data sheet
- Volume
- 400 ml
- Product type
- Technical product
- Application domain
- Maintenance
- Application area
- ...
- Packaging
- 12 per box
Shake thoroughly the contact cleaner lubricant spray before use. Always ensure that any electronic equipment has been unplugged or switched off before applying. Point the aerosol at the surface to be cleaned and spray. After treating, wait until the product has evaporated completely (after +/-15 minutes) before switching equipment back on.
Safety data sheets are available free of charge on the internet: www.quick-fds.com.
CLP labelling with three pictograms.
DANGER
H222 Extremely flammable aerosol.
H229 Pressurised container: May burst if heated.
H315 Causes skin irritation.
H319 Causes serious eye irritation.
H336 May cause drowsiness or dizziness.
H411 Toxic to aquatic life with long lasting effects.
A combined cleaner and lubricant oil that not only offers high quality protection but can also dissolve rust. It guarantees a long operational life for electrical appliances and less downtime. The contact cleaner lubricant spray is non-corrosive, eliminates dirt and improves conductivity. It reduces mechanical resistance and provides long-term protection against humidity.