Impregnation spray

By box unit

A spray that impregnates the surface treated to provide optimum protection against humidity and prevent dirt becoming encrusted. Suitable for both porous and nonporous surfaces such as seals, natural stone and ceramic coatings. The invisible, waterproof yet air-permeable film created provides the treated surface with efficient and effective protection against dirt, oil and humidity.

More details

Would you like to learn more?
Contact us

Data sheet

Packaging 12 per box
Volume 600 ml
Product type Technical product
Application domain Substrate preparation
Application surface ...


More info

Specifications of the Impregnation spray


  • Packaging: 600 ml net
  • Composition: fluorocarbon
  • Appearance: colourless clear liquid
  • Propellant: propane-butane
  • Relative density (20°C g/ml): 0.697
  • Vapour pressure at 20°C: 3.7 - 4.3 bar
  • Spray flow: 1.7 g/sec
  • Drying time: approximately one hour
  • VOC-EU g/l: 697 g/l


Health and safety

Safety data sheets are available free of charge on the internet:
CLP labelling with three pictograms.

H222 Extremely flammable aerosol.
H229 Pressurised container: May burst if heated.
H315 Causes skin irritation.
H336 May cause drowsiness or dizziness.
H411 Toxic to aquatic life with long lasting effects.

picto inflammablepicto dangereux


Instructions of use of the Impregnation spray


Shake thoroughly before use. Spray the areas concerned with successive light coats allowing a drying time of 5-10 minutes between each application.