Cutting oil
Reference : 930107
Professional tapping and cutting oil prevents metal overheating during boring, cutting, grinding, milling, sawing, sanding and planning, etc. It protects and lubricates tools, reducing wear and increasing working speed, saving both money and time.
Cutting oil
Specifications of the Cutting oil
- Packaging: 400 ml
- Composition: mineral oils with extreme pressure (EP) and anti-wear (AW) additives
- Appearance: light brown oil
- Propellant: propane-butane
- VOC-EU g/l: 161 g/l
- Relative density (20°C g/ml): 0.807
- Vapour pressure at 20°C: 3.3 - 3.9 bar
- Spray flow: +/- 2.0 g/sec
930107
Data sheet
- Volume
- 400 ml
- Product type
- Technical product
- Application domain
- Substrate preparation
- Application area
- ...
- Packaging
- 12 per box
Shake thoroughly the cutting oil before applying. Spray tools and equipment thoroughly before using. It is important that the tools and equipment remain damp.
Safety data sheets are available free of charge on the internet: www.quick-fds.com.
CLP labelling with two pictograms.
DANGER
H222 Extremely flammable aerosol.
H229 Pressurised container: May burst if heated.
H411 Toxic to aquatic life with long lasting effects.
Professional tapping and cutting oil prevents metal overheating during boring, cutting, grinding, milling, sawing, sanding and planning, etc. It protects and lubricates tools, reducing wear and increasing working speed, saving both money and time.