Lubrifiant PTFE sec View larger

PTFE dry lubricant

By box unit

A high quality PTFE dry lubricant for mechanical components in metal or synthetic materials that need protection against oil and grease residues. The product forms a dry anti-static film that is virtually invisible, eliminating problems caused by friction on start-up and due to slipping.It is resistant to weather, acids and soft alkalis; it is water-repellent and pH neutral.

More details

0,00 €


Data sheet

Volume500 ml
Packaging12 per box
Product typeTechnical product
Application domainMaintenance
Application surface...

Download

More info


Our dry PTFE spray offers a very low friction coefficient, an almost smooth texture, with particles of approximately 5 micrometres, together with very good adhesion.  It therefore reduces wear and seizure for machine and equipment parts, conveyor belts, guide rails, machinery/agricultural parts.

 

Specifications of the PTFE dry lubricant

 

  • Packaging: 500 ml
  • Composition: PTFE dispersion, polymers in alcoholic solvents
  • Appearance: clear, slightly cloudy liquid
  • Propellant: propane-butane
  • VOC-EU g/l: 598 g/l
  • Relative density (20°C g/ml): 0.604
  • Vapour pressure at 20°C: 4 - 5 bar
  • Spray flow: 1.1 g/sec
  • Particle size: 3.7 μm
  • Drying time: approximately 5 minutes
  • Withstands temperatures: -180°C to +260°C

 

Health and safety

Safety data sheets are available free of charge on the internet: www.quick-fds.com.
CLP labelling with two pictograms.

DANGER
H222 Extremely flammable aerosol.
H229 Pressurised container: May burst if heated.
H319 Causes serious eye irritation.
H336 May cause drowsiness or dizziness.

picto inflammablepicto dangereux

 

Instructions of use of the PTFE dry lubricant

 

Shake well the PTFE dry lubricant before using and apply a thin layer of Dry PTFE. A dry PTFE film is formed following evaporation of the solvent (approximately 5 minutes).