TRACING SPORT line marking paint for grass
Reference : 151800SPO
TRACING SPORT AND GRASS paint is a line marker specifically designed for multisport grass sports fields. TRACING® Sport is available in a 750ml (net volume) aerosol and meets the highest standards for quality marking. This grass paint is applied using a marking machine specifically designed for grass sports fields.
TRACING SPORT line marking paint for grass
TRACING® SPORT : THE LINE MARKING PAINT DESIGNED FOR MULTISPORT GRASS SPORTS FIELDS
Properties of the TRACING SPORT line marking paint for grass
- Crisp and precise marking thanks to its purpose-designed nozzle
- Rapid drying (15-20 min)
- Excellent coverage
- Specially-designed formulation that will not damage the grass
- Weatherproof for long-term marking
- Temperature of use: +5° to 50°C
Line width 4 cm to 10 cm | 1 x 750 ml aerosol | ||
1 coat | 2 coats | ||
Slow application | 75 m | 35 m | |
Rapid application | 110 m | 55 m |
Composition
Binder: acrylic
Pigments: mineral and organic, free from lead and cadmium
Solvents: a complex blend free from chlorinated solvents and aromatic compounds (toluene, xylene, etc)
Propellant: a specific mix of isobutane and propane
General conditions for use
For a good quality line, the first coat should be applied quickly (print layer); however the second and optional third coats should be applied more slowly to obtain the desired coverage.
For maximum visibility, a 2-coat application (with a rapid first application) is recommended.
Marking applied to wet or damp grass will have a shorter life.
Whenever possible apply to dry ground.
Data sheet
- Volume
- 750 ml
- Product type
- Line marking spray paint
- Application domain
- Signalling and events
- Application area
- ...
- Packaging
- Box of 6 cans
- Manually or using our application equipment (line marking equipment, marking paint gun, see bellow)
- Drying Time: 15 to 20 min
- Use head down, adjust the position of the aerosol in the equipment used to give an application height that produces the desired line width.
- BEFORE USE: Shake the can vigorously in an upside down position to thoroughly mix the paint, continue shaking even after having clearly heard the ball bearings.
- AFTER USE: Purge head up (until gas only comes out) to clean the valve and nozzle.
Safety data sheets are available free of charge on the internet: www.quick-fds.com.
No paint mist or drips during use.
CLP labelling with a single pictogram.
Related articles on blog