Properties of the Heat resistant coating

• Excellent adhesion
• High resistance to petrol and chemicals
• Heat resistant up to a peak temperature of 650°C
• Dust dry after 5 to 10 minutes
• Touch dry after 10 to 15 minutes
• Completely dry after curing for 30 to 60 minutes at 200°C

(Figures given for information only, actual times will depend on the temperature, paint thickness, humidity etc)

DANGEROUS. FOLLOW THE PRECAUTIONS.

Specifications of the Heat resistant coating

Composition
Binder: silicone resin
Pigments: Heat resistant colour pigments
Propellant: dimethyl ether

Health and safety

Safety data sheets are available free of charge on the internet: www.quick-fds.com.
CLP labelling with two pictograms.

DANGER

HYDROCARBURES, C6, ISOALKANES, <5% N-HEXANE
N-BUTYL ACETATE
H222 Extremely flammable aerosol.
H229 Pressurised container: May burst if heated.
H315 Causes skin irritation.
H319 Causes serious eye irritation.
H336 May cause drowsiness or dizziness.
H412 Harmful to aquatic life with long lasting effects.

Instructions for use

The surface must be clean, dry and free of grease. Remove all residual paint, varnish, rust, etc, then sand. When using out-of-doors, remove any moss or algae present on the surface. Cover the surrounding areas. Shake from time to time during use. Spray at a distance of approximately 25 to 30 centimetres from the surface. When dry, heat to a temperature of at least 200°C for 30 to 60 minutes to fully harden the paint coating.