By box unit
The Soppec PRO TECH Stripper acts rapidly and intensely for a powerful effect. Ideal to remove alkyd resin-based paint or aqueous phase epoxy and polyurethane coatings, even if bicomponent, etc. Can be applied to almost all surfaces.
This product is no longer in stock
|Packaging||12 per box|
|Product type||Technical product|
|Application domain||nettoyage des surfaces|
Safety data sheets are available free of charge on the internet: www.quick-fds.com.
CLP labelling with one pictogram.
H222 Extremely flammable aerosol.
H229 Pressurised container: May burst if heated.
Do not use the paint stripper spray at temperatures below 5°C. The surface should not include any frozen areas. Under low
temperatures, the product has a slower action. Protect adjacent areas by covering. Apply a sufficiently thick layer of the paint stripper to the surface to be treated and leave to act for at least 15 minutes. Adjust the action time as necessary to eliminate bicomponent coatings. Brush or clean the sprayer with warm water using appropriate pressure. Remove any dissolved paint residues with a scraper or spatula. Repeat the treatment as necessary. Rinse with water.