Peinture anti tâches View larger

Stain masking paint

By box unit

A purpose-designed paint to mask stains such as: grease marks, water stains, solvent residues, tar or glue marks. Dries quickly to a matt white finish. Can be applied to walls, ceilings, concrete, plaster, etc. Usable both inside and out-of-doors. Suitable as a primer before painting walls or ceilings. Can be applied before a coat of cement paint.

More details

Would you like to learn more?
Contact us

Data sheet

Packaging Box of 12 cans
Volume 500 ml
Product type Maintenance product
Application domain Substrate preparation
Application surface Plaster

Download

More info


Properties of the Stain masking paint

 

  • Excellent adhesion
  • High scratch and impact resistance
  • UV-resistant and does not yellow over time
  • Rapid drying
  • Matt satin finish
  • Touch dry after 10 minutes
  • Completely dry after 20 minutes

(Figures given for information only, actual times will depend on the temperature, paint thickness, humidity etc)

 

Specifications of the Stain masking paint

  

Composition
Binder: acrylate copolymers
Solvents: blend of solvents
Propellant: dimethyl ether

Health and safety

Safety data sheets are available free of charge on the internet: www.quick-fds.com.
CLP labelling with two pictograms.

DANGER
H222 Extremely flammable aerosol.
H229 Pressurised container: May burst if heated.
H319 Causes serious eye irritation.
H336 May cause drowsiness or dizziness.

picto inflammablepicto dangereux

 

Instructions for use

 

The surface must be clean, dry and free of grease. Remove all residual paint, varnish, rust, etc, then sand. When using out-of-doors, remove any moss or algae present on the surface. Cover the surrounding areas. Spray at a distance of approximately 25 to 30 centimetres from the surface. Leave to dry for 30 minutes between coats if applying several thin layers.