View larger
Graphite penetrating oil
By box unit
A very effective blend offering exceptional penetration that lubricates and dissolves rust. The graphite penetrating oil is recommended for releasing seized metallic parts such as screws, nuts, bolts, hinges, tools, gears, chains, locks, all materials used for fixing, aluminium and steel connectors, etc. Can be applied to all types of metal and to brake parts to avoid damage caused when releasing.
Data sheet
| Packaging | 12 per box |
| Volume | 500 ml |
| Product type | Technical product |
| Application domain | Surface maintenance |
| Application surface | ... |
Download
More info
Specifications of the Graphite penetrating oil
- Packaging: 500 ml
- Composition: solvents, graphite-based oils, and slow evaporation additives
- Appearance: black liquid
- Propellant: CO2
- VOC-EU g/l: 718 g/l
- Relative density (20°C g/ml): 0.806
- Vapour pressure at 20°C: 5.2 - 5.8 bar
- Spray flow: +/- 2.0 g/sec
Health and safety
Safety data sheets are available free of charge on the internet: www.quick-fds.com.
CLP labelling with four pictograms.
DANGER
H222 Extremely flammable aerosol.
H229 Pressurised container: May burst if heated.
H315 Causes skin irritation.
H319 Causes serious eye irritation.
H336 May cause drowsiness or dizziness.
H372 Causes damage to organs through prolonged or repeated exposure (in contact with skin).
H411 Toxic to aquatic life with long lasting effects.
Instructions of use of the Graphite penetrating oil
Shake well before using. Apply to the surface to be treated and leave to act for approximately 10 minutes. Then unscrew or otherwise loosen the parts. Repeat if necessary.