By box unit
Heat-resistant paints that can be used on surfaces exposed to very high temperatures such as: steam pipes, engines, exhaust pipes, radiators, etc. They can be used to coat new, bare, shot, rusted or painted steel, as long as it has been correctly prepared before applying the HT paint.
This product is no longer in stock
|Packaging||Box of 12 cans|
|Product type||Heat resistant paint|
(Figures given for information only, actual times will depend on the temperature, paint thickness, humidity etc)
Binder: silicone resin
Pigments: Heat resistant colour pigments
Propellant: dimethyl ether
Safety data sheets are available free of charge on the internet: www.quick-fds.com.
CLP labelling with two pictograms.
H222 Extremely flammable aerosol.
H229 Pressurised container: May burst if heated.
H315 Causes skin irritation.
H319 Causes serious eye irritation.
H336 May cause drowsiness or dizziness.
H412 Harmful to aquatic life with long lasting effects.
The surface must be clean, dry and free of grease. Remove all residual paint, varnish, rust, etc, then sand. When using out-of-doors, remove any moss or algae present on the surface. Cover the surrounding areas. Shake from time to time during use. Spray at a distance of approximately 25 to 30 centimetres from the surface. When dry, heat to a temperature of at least 200°C for 30 to 60 minutes to fully harden the paint coating.